How to Care for Your Slimer Tee So the Print Lasts
By Online Sports Supplement Store | The Official Home | Published: 2026-11-02
Category: Tips & Care
Keep the EHPlabs x Ghostbusters Slimer Tee looking sharp with a simple wash-and-dry routine that protects the graphic and the fabric.
Quick answer
Turn the Slimer Tee inside out, wash it cold on a gentle cycle, and skip the dryer. That single routine protects the graphic and keeps the fabric from shrinking or fading.
Why the print needs different handling than the shirt
A graphic tee has two materials to protect: the fabric and the printed design. Heat and friction are the main enemies of the print, while hot water and high dryer temperatures can shrink or distort the fabric. Washing inside out reduces abrasion on the graphic, and air drying removes the heat that causes prints to crack over time.
When to bend the rules
If the tee is heavily soiled from a sweaty session, a pre-rinse in cold water before washing helps lift salts without harsh treatment. Avoid bleach and fabric softener entirely, as both can degrade the print and the fabric over repeated washes. For stubborn spots, treat them gently by hand rather than scrubbing the printed area.
Step-by-step Slimer Tee care
- Turn the tee inside out: Before washing, flip the Slimer Tee inside out so the printed graphic faces inward. This reduces direct rubbing against other garments and the washing machine drum. Check that the print is fully protected before the tee goes into the machine.
- Wash cold on a gentle cycle: Use cold water and a gentle or delicate cycle with a mild detergent. Avoid hot water, which can weaken the print bond and shrink the fabric. Never use bleach or fabric softener, as both can damage the graphic.
- Skip the dryer and air dry: Remove the tee promptly after washing and hang or lay it flat to dry away from direct sunlight. High dryer heat is a leading cause of cracked prints. If you must use a dryer, choose the lowest heat setting and remove the tee while slightly damp.
- Store folded, not hung: Fold the Slimer Tee and store it in a drawer rather than hanging it on a wire hanger, which can stretch the shoulders and distort the print over time. Keep the tee away from rough surfaces or velcro that could snag the graphic.
Product facts
- Slimer Tee: The Slimer Tee is an EHPlabs and Ghostbusters collaboration with a graphic design. The printed graphic is the focal point, so your care routine should prioritize protecting it from heat and friction.
Slimer Tee
